Display Garp Timer - HP 3600 v2 Series Command Reference Manual

<Sysname> display garp statistics interface ethernet 1/0/1 to ethernet 1/0/2
GARP statistics on port Ethernet1/0/1
Number of GVRP Frames Received
Number of GVRP Frames Transmitted
Number of Frames Discarded
GARP statistics on port Ethernet1/0/2
Number of GVRP Frames Received
Number of GVRP Frames Transmitted
Number of Frames Discarded

display garp timer

Syntax
display garp timer [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-list: Displays the GARP timer settings of one or multiple ports. You can specify up to 10
port lists.
You can specify a single port in the form of interface-type interface-number.
•
You can specify a port range in the form of interface-type interface-number1 to interface-type
•
interface-number2, where the end port number specified by interface-number2 must be greater
than the start port number specified by interface-number1.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display garp timer to display GARP timers on specific ports. If no ports are specified, this command
displays the GARP timers on all ports.
Related commands: garp timer hold, garp timer join, garp timer leave, and garp timer leaveall.
Examples
# Display GARP timers on port Ethernet 1/0/1.
<Sysname> display garp timer interface ethernet 1/0/1
: 5
: 2
: 1
: 3
: 4
: 2
214