HP 3600 v2 Series Command Reference Manual page 184

View
Any view
Default level
1: Monitor level
Parameters
all: Displays all the MAC address-to-VLAN entries.
dynamic: Displays dynamically configured MAC address-to-VLAN entries.
mac-address mac-address: Displays the MAC address-to-VLAN entry containing the specified MAC
address.
mask mac-mask: Displays the MAC address-to-VLAN entries with their MAC addresses in the specified
range.
static: Displays the statically configured MAC address-to-VLAN entries.
vlan vlan-id: Displays the MAC address-to-VLAN entries associated with the specified VLAN.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mac-vlan to display the specified MAC address-to-VLAN entries.
If mac-address mac-address is specified but mask is not specified, only the MAC address-to-VLAN entry
containing the specified MAC address is displayed.
Examples
# Display all the MAC address-to-VLAN entries.
<Sysname> display mac-vlan all
The following MAC-VLAN address exist:
S: Static
MAC ADDR
-------------------------------------------------------------------
0008-0001-0000
0002-0001-0000
Total MAC VLAN address count:2
Table 36 Command output
Field
S: Static
D: Dynamic
D: Dynamic
MASK
FFFF-FF00-0000
FFFF-FFFF-FFFF
Description
The character S stands for the MAC address-to-VLAN entries that are
configured statically.
The character D stands for the MAC address-to-VLAN entries that are
configured dynamically.
VLAN ID PRIO
5 3
5 3
176
STATE
S
S&D