HP 3600 v2 Series Command Reference Manual page 17

Hide thumbs Also See for 3600 v2 Series:
Table of Contents

Advertisement

Input (total):
0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input (normal):
0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input:
0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
Table 4 Command output
Field
Ethernet1/0/1 current state
IP Packet Frame Type
Hardware address
Description
Loopback is not set
Unknown-speed mode
unknown-duplex mode
Link speed type is autonegotiation
link duplex type is autonegotiation
The Maximum Frame Length
Broadcast MAX-ratio
Unicast MAX-ratio
Multicast MAX-ratio
Allow jumbo frame to pass
PVID
Mdi type
Port link-type
Tagged VLAN ID
Description
Physical state of the Ethernet interface. For more information, see
5.
Ethernet framing format on the interface.
Hardware address of the port.
Description of the interface.
The loopback testing function is disabled.
The port speed is unknown.
The duplex mode is unknown.
The interface will negotiate a speed with its peer.
The interface will negotiate a duplex mode with its peer.
Maximum Ethernet frame length allowed on the interface.
Broadcast suppression threshold as a percentage of the interface
transmission capability. When the threshold is exceeded, the interface
drops broadcast packets.
Unknown unicast suppression threshold as a percentage of the interface
transmission capability. When the threshold is exceeded, the interface
drops unknown unicast packets.
Multicast suppression threshold as a percentage of the interface
transmission capability. When the threshold is exceeded, the interface
drops multicast packets.
Maximum length of Ethernet frames that are allowed to pass through the
interface.
Port VLAN ID.
Cable type.
Link type of the interface, which could be access, trunk, or hybrid.
VLANs for which the interface sends packets without removing VLAN
tags.
9
Table

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 hi series

Table of Contents