Interface Route-Aggregation; Lacp Period Short - HP 3600 v2 Series Command Reference Manual

interface route-aggregation

Syntax
interface route-aggregation interface-number
undo interface route-aggregation interface-number
View
System view
Default level
2: System level
Parameters
interface-number: Specifies a Layer 3 aggregate interface by its number, in the range of 1 to 128.
Description
Use interface route-aggregation to create a Layer 3 aggregate interface and enter the Layer 3
aggregate interface view.
Use undo interface route-aggregation to remove a Layer 3 aggregate interface.
When you create a Layer 3 aggregate interface, a Layer 3 aggregation group with the same number is
automatically created. Removing the Layer 3 aggregate interface also removes the Layer 3 aggregation
group. At the same time, the member ports of the aggregation group, if any, leave the aggregation
group.
Examples
# Create Layer 3 aggregate interface Route-Aggregation 1 and enter its view.
<Sysname> system-view
[Sysname] interface route-aggregation 1
[Sysname-Route-Aggregation1]

lacp period short

Syntax
lacp period short
undo lacp period
View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use lacp period short to set the LACP timeout interval on a port to the short timeout interval (1 second).
Use undo lacp period to restore the default setting.
The default LACP timeout interval is the long timeout interval (30 seconds).
90