Mac-Vlan Enable; Mac-Vlan Mac-Address - HP 3600 v2 Series Command Reference Manual

mac-vlan enable

Syntax
mac-vlan enable
undo mac-vlan enable
View
Layer 2 Ethernet port view
Default level
2: System level
Parameters
None
Description
Use mac-vlan enable to enable the MAC-based VLAN feature on a port.
Use undo mac-vlan enable to disable the MAC-based VLAN feature on a port.
By default, the MAC-based VLAN feature is disabled on a port.
This command is available only on hybrid ports.
Examples
# Enable the MAC-based VLAN feature on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname–Ethernet1/0/1] mac-vlan enable

mac-vlan mac-address

Syntax
mac-vlan mac-address mac-address [ mask mac-mask ] vlan vlan-id [ priority pri ]
undo mac-vlan { all | mac-address mac-address [ mask mac-mask ] | vlan vlan-id }
View
System view
Default level
2: System level
Parameters
mac-address mac-address: Specifies a MAC address.
mask mac-mask: Specifies a mask for the MAC address in the format of H-H-H. The mac-mask argument
is comprised of the high-order part (all the binary bits of which are 1s) and the low-order part (all the
binary bits of which are 0s). By default, the hexadecimal digits of this argument are all Fs.
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.
priority pri: Specifies the 802.1p priority value corresponding to the specified MAC address. The pri
argument ranges from 0 to 7.
178