interface and all the member ports in the aggregation group. Configured in port group view, the
command takes effect on all ports in the port group.
Examples
# Enable basic QinQ on Ethernet 1/0/1, and configure Ethernet 1/0/1 to transparently transmit frames
from VLAN 2, VLAN 3, and VLAN 50 through VLAN 100.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port link-type trunk
[Sysname-Ethernet1/0/1] port trunk permit vlan 2 3 50 to 100
[Sysname-Ethernet1/0/1] qinq enable
[Sysname-Ethernet1/0/1] qinq transparent-vlan 2 3 50 to 100
229