Port Isolate-User-Vlan Host - HP 3600 v2 Series Command Reference Manual

return
[Sysname-Ethernet1/0/1] undo port isolate-user-vlan
[Sysname-Ethernet1/0/1] display this
#
interface Ethernet1/0/1
port link-mode bridge
port link-type hybrid
undo port hybrid vlan 1
port hybrid vlan 20 untagged
port hybrid pvid vlan 2
#
return
# Assign access port Ethernet 1/0/1 to VLAN 10, which is not an isolate-user-VLAN, configure the port
to operate in promiscuous mode in VLAN 10, and then cancel the configuration.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] display this
#
interface Ethernet1/0/1
port link-mode bridge
#
return
[Sysname-Ethernet1/0/1] port isolate-user-vlan 10 promiscuous
[Sysname-Ethernet1/0/1] display this
#
interface Ethernet1/0/1
port link-mode bridge
port isolate-user-vlan 10 promiscuous
port access vlan 10
#
return
[Sysname-Ethernet1/0/1] undo port isolate-user-vlan
[Sysname-Ethernet1/0/1] display this
#
interface Ethernet1/0/1
port link-mode bridge
port access vlan 10
#
return

port isolate-user-vlan host

Syntax
port isolate-user-vlan host
undo port isolate-user-vlan
View
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
201