HP 3600 v2 Series Command Reference Manual page 245

Field
Power priority
PD requested power value
PSE allocated power value
Link aggregation supported
Link aggregation enabled
Aggregation port ID
MED information
Media policy type
Unknown Policy
VLAN tagged
Media Policy VlanID
Media Policy L2 priority
Media Policy Dscp
Location format
Location Information
PoE PSE power source
Description
This field appears only on the devices that support PoE+.
PoE power supply priority of PSE ports:
•
Unknown
•
Critical
•
High
•
Low
This field appears only on the devices that support PoE+.
Power (in W) that the PD requests.
This field appears only on the devices that support PoE+.
Power (in W) that the PSE provides to the PD.
Indicates whether or not link aggregation is supported.
Indicates whether or not link aggregation is enabled.
Aggregation group ID, which is 0 when link aggregation is disabled.
MED LLDP information.
Media policy type:
•
unknown
•
voice
•
voiceSignaling
•
guestVoice
•
guestVoiceSignaling
•
softPhoneVoice
•
videoconferencing
•
streamingVideo
•
videoSignaling
Indicates whether or not the media policy is unknown.
Indicates whether or not packets of the media VLAN are tagged.
ID of the media VLAN.
Layer 2 priority.
DSCP precedence.
When the port is allowed to advertise Location Identification TLVs, this field
indicates the location information format:
•
Invalid—The format of the location information is invalid.
•
Coordinate-based LCI—The location information is coordinate-based.
•
Civic Address LCI—Typical address information.
•
ECS ELIN—Telephone number for urgencies.
When the port is allowed to advertise Location Identification TLVs, this field
displays the location information of the device.
When the device is a PSE device, this field displays the PSE power type:
•
Unknown—Unknown power supply
•
Primary—Primary power supply
•
Backup—Backup power supply
237