HP 3600 v2 Series Command Reference Manual page 224

Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Specifies a VLAN ID, ranging from 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display gvrp state to display GVRP state machines in a specified VLAN on a port.
Examples
# Display GVRP state machines in VLAN 2 on port Ethernet 1/0/1.
<Sysname> display gvrp state interface ethernet 1/0/1 vlan 2
GVRP state of VLAN 2 on port Ethernet1/0/1
Table 46 Command output
Field
GVRP state of VLAN 2 on port Ethernet1/0/1
Applicant state machine
Applicant state machine
Registrar state machine
: VP
: MTR
Description
Information about the GVRP state machines in VLAN 2 on
port Ethernet 1/0/1.
Applicant state machine handles attribute declarations. Its
state can be VA, AA, QA, LA, VP, AP, QP, VO, AO, QO,
LO, VON, AON, and QON. Each state consists of two or
three letters with the following meanings:
•
The first letter indicates the state: V for Very anxious, A
for Anxious, Q for Quiet, and L for Leaving.
•
The second letter indicates the membership state: A for
Active member, P for Passive member, and O for
Observer.
•
The third letter N (if any) stands for Non-participant.
For example, VP indicates "Very anxious, Passive member".
216