Mvrp Global Enable - HP 3600 v2 Series Command Reference Manual

Default
The Periodic timer is 100 centiseconds.
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Parameters
timer-value: Periodic timer (in centiseconds), which can be 0 or 100.
Description
Use mrp timer periodic to set the Periodic timer.
Use undo mrp timer periodic to restore the default.
By default, the Periodic timer is 100 centiseconds.
Setting the Periodic timer to 0 disables periodic transmission of MRP messages. Setting the Periodic timer
to 100 enables periodic transmission of MRP messages.
Related commands: display mvrp running-status.
Examples
# Set the Periodic timer to 0 centiseconds.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mrp timer periodic 0

mvrp global enable

Syntax
mvrp global enable
undo mvrp global enable
View
System view
Default level
2: System level
Description
Use mvrp global enable to enable MVRP globally.
Use undo mvrp global enable to restore the default.
By default, MVRP is disabled globally.
Disabling MVRP globally also disables MVRP on all ports.
Related commands: display mvrp running-status and mvrp enable.
Examples
# Enable MVRP globally.
<Sysname> system-view
274