Aggregation Port Id - HP 3600 v2 Series Command Reference Manual

Field
Link aggregation enabled

Aggregation port ID

Maximum frame size
Location format
Location information
PoE PSE power source
PoE PD power source
Port PSE Priority
Port PD Priority
Port available power value
Unknown basic TLV
Description
Indicates whether or not link aggregation is enabled on the port that
connects the LLDP neighboring device to the local device.
Aggregation group ID, which is 0 when link aggregation is disabled.
Maximum frame size of the port that connects the LLDP neighboring
device to the local device.
Location information format of the neighboring device which is a
communication terminal with the MED device type being Class III, for
example, an IP phone:
•
Invalid—The format of the location information is invalid.
•
Coordinate-based LCI—The location information is
coordinate-based.
•
Civic Address LCI—Typical address information.
•
ECS ELIN—Telephone for urgencies.
Location information of the neighboring device which is a
communication terminal with the MED device type being Class III, for
example, an IP phone.
Power source type of an LLDP neighboring device which is a PSE
device:
•
Unknown—Unknown power supply
•
Primary—Primary power supply
•
Backup—Backup power supply
PD power type of an LLDP neighboring device which is a PD device:
•
Unknown—Unknown power supply
•
PSE—PSE power supply
•
Local—Local power supply
•
PSE and local—PSE and local power supplies
PoE power supply priority of ports on an LLDP neighboring device
which is a PSE device:
•
Unknown
•
Critical
•
High
•
Low
PoE power receiving priority of ports on an LLDP neighboring device
which is a PD device:
•
Unknown
•
Critical
•
High
•
Low
•
Power supplied to the port when the LLDP neighboring device is a
PSE device, in watts.
•
Power supplied by the port when the LLDP neighboring device is a
PD device, in watts.
This field appears only when the device receives unknown basic
TLVs.
243