HP 3600 v2 Series Command Reference Manual page 93

Description
Use display link-aggregation summary to display the summary information for all aggregation groups.
The information about the remote system for a static link aggregation group may be displayed as none
or may not be displayed, because the aggregation group is not aware of the partner's information.
Examples
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG
Interface
-------------------------------------------------------------------------
BAGG1
BAGG10
Table 20 Command output
Field
Aggregation Interface Type
Aggregation Mode
Loadsharing Type
Actor System ID
AGG Interface
AGG Mode
Partner ID
Select Ports
Unselect Ports
Share Type
AGG Partner ID
Mode
S none
D 0x8000, 000f-e267-57ad
Select Unselect
Ports
1
2
Description
Aggregate interface type:
•
BAGG—Layer 2 aggregate interface.
•
RAGG—Layer 3 aggregate interface.
Aggregation group type:
•
S—Static link aggregation.
•
D—Dynamic aggregation.
Load sharing type:
•
Shar—Load sharing.
•
NonS—Non-load sharing.
Local system ID, which comprises the system LACP priority and the
system MAC address.
Type and number of the aggregate interface.
Aggregation group type.
System ID of the partner, which comprises the system LACP priority
and the system MAC address.
Total number of Selected ports.
Total number of Unselected ports.
Load sharing type.
85
Share
Ports Type
0 Shar
0 Shar