If the bridge-aggregation interface-number or route-aggregation interface-number keyword and
•
argument combination is specified, the command clears the statistics of the specified Layer 2 or
Layer 3 aggregate interface.
•
The bridge-aggregation or route-aggregation keyword becomes available only after you create
Layer 2 or Layer 3 aggregate interfaces on the device.
Examples
# Clear the statistics of Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Syntax
reset lacp statistics [ interface interface-list ]
View
User view
Default level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ], where interface-type interface-number indicates
the port type and port number.
Description
Use reset lacp statistics to clear the LACP statistics on the specified member ports or all member ports, if
no member ports are specified.
Related commands: display link-aggregation member-port.
Examples
# Clear the LACP statistics on all link aggregation member ports.
<Sysname> reset lacp statistics
shutdown
Syntax
shutdown
undo shutdown
View
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default level
2: System level
Parameters
None
99