Default Settings; Leds; Binary Input; A.5 Default Settings - Siemens siprotec SJ62 User Manual

A.5

Default Settings

A.5.1

LEDs

A.5.2

Binary Input

SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
When the device leaves the factory, a large number of LED indications, binary inputs
and outputs as well as function keys are already preset. They are summarized in the
following table.
Table A-3 Preset LED displays
LEDs Default function
LED1 Relay TRIP
LED2 50/51 Ph A PU
67 A picked up
LED3 50/51 Ph B PU
67 B picked up
LED4 50/51 Ph C PU
67 C picked up
LED5 50N/51NPickedup
67N picked up
Failure Σ I
LED6
Fail I balance
Fail V balance
Fail Ph. Seq. I
Fail Ph. Seq. V
LED7 Not configured
LED8 Brk OPENED
LED9 >Door open
LED10 >CB wait
LED11 Not configured
LED12 Not configured
LED13 Not configured
LED14 Not configured
Table A-4 Binary input presettings for all devices and ordering variants
Binary Input Default function
BI1 >BLOCK 50-2
>BLOCK 50N-2
BI2 >Reset LED
BI3 >Light on
BI4 >52-b
52Breaker
BI5 >52-a
52Breaker
Function No.
511 Relay GENERAL TRIP command
1762 50/51 Phase A picked up
2692 67/67-TOC Phase A picked up
1763 50/51 Phase B picked up
2693 67/67-TOC Phase B picked up
1764 50/51 Phase C picked up
2694 67/67-TOC Phase C picked up
1765 50N/51N picked up
2695 67N/67N-TOC picked up
162 Failure: Current Summation
163 Failure: Current Balance
167 Failure: Voltage Balance
175 Failure: Phase Sequence Current
176 Failure: Phase Sequence Voltage
1 No Function configured
Breaker OPENED
>Cabinet door open
>CB waiting for Spring charged
1 No Function configured
1 No Function configured
1 No Function configured
1 No Function configured
Function No.
1721 >BLOCK 50-2
1724 >BLOCK 50N-2
5 >Reset LED
>Back Light on
4602 >52-b contact (OPEN, if bkr is
closed)
52 Breaker
4601 >52-a contact (OPEN, if bkr is open)
52 Breaker

A.5 Default Settings

Description
Description
630