Processor Board
A–CPU for
7SJ62.../EE
Figure 3-10
Processor printed circuit board A–CPU for devices .../EE and higher with jumpers settings required for the
board configuration
SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
The following figure depicts the layout of the printed circuit board for devices with
release .../EE. The location and ratings of the miniature fuse (F1) and of the buffer
battery (G1) are shown in the following figure.
The preset nominal voltage of the integrated power supply is checked according to
Table 3-4, the pickup voltages of the binary inputs BI1 to BI3 are checked according
to Table 3-5, and the contact mode of the binary outputs (BO1 and BO2) is checked
according to Table 3-6.
3.1 Mounting and Connections
380