Siemens siprotec SJ62 User Manual page 454

SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
PROFIBUS FO
(FMS and DP)
DNP3.0 / MODBUS
RS485
DNP3.0 / MODBUS Fiber
Optical Link
FO connector type
Connection for flush-
mounted case
Connection for surface
mounting housing
Transmission Speed
recommended:
Optical Wavelength
Laser Class 1 according to
EN 60825-1/-2
Permissible Optical Link
Signal Attenuation
Maximum Distance of
Transmission
Connection for flush-
mounted case
Connection for surface
mounting housing
Test Voltage
Transmission Speed
Maximum Distance of
Transmission
FO connector type
Connection for flush-
mounted case
Connection for surface
mounting housing
Transmission Speed
Optical Wavelength
Laser Class 1 according to
EN 60825-1/-2
Permissible Optical Link
Signal Attenuation
Maximum Distance of
Transmission
4.1 General Device Data
ST connector
Single ring / double ring according to
the order for FMS; for DP only double
ring available
Rear panel, mounting location „B"
in console housing on the case bottom
via RS485 and external RS485/optical
converter
up to 1.5 MBd
> 500 kBd with normal casing
≤ 57 600 Bd at detached operator
panel
λ = 820 nm
using glass fiber 50/125 μm or using
glass fiber 62.5/125 μm
max. 8 dB, with glass fiber 62.5/125
μm
max. 0.93 miles (1.5 km)
Rear panel, mounting location „B", 9-
pin D-SUB miniature connector
at the housing mounted case on the
case bottom
500 VAC
up to 19,200 Bd
max. 0.62 miles (1 km)
ST–Connector Receiver/Transmitter
Rear panel, mounting location „B"
not available
up to 19,200 Bd
λ = 820 nm
using glass fiber 50/125 μm or using
glass fiber 62.5/125 μm
max. 8 dB, with glass fiber 62.5/125
μm
max. 0.93 miles (1.5 km)
452