Siemens siprotec SJ62 User Manual page 334

Measured Values second-
P, Q, S (P and Q No secondary measured values
phase-segregated)
cos ϕ
Power Factor
(phase-segregated)
Frequency Protec- f in Hz
tion
SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
ary
cos ϕ
f in Hz
Table 2-26 Legend with conversion formulae
Parameter
Vnom PRIMARY
Vnom SECONDARY
CT PRIMARY
CT SECONDARY
Vph / Vdelta
Depending on the type of device ordered and the device connections, some of the op-
erational measured values listed below may not be available. The phase–to–ground
voltages are either measured directly, if the voltage inputs are connected phase–to–
ground, or they are calculated from the phase–to–phase voltages V
the displacement voltage V
The displacement voltage V
to-ground voltages:
Please note that value V
primary
Address
202 Ignd-CT PRIM
203 Ignd-CT SEC
204 FullScaleVolt.
205 FullScaleCurr.
206
.
N
is either measured directly or calculated from the phase-
N
is indicated in the operational measured values.
0
2.23 Auxiliary Functions
%
cos ϕ · 100 in %
Parameter
A–B
Address
217
218
1101
1102
and V and
B–C
332