Input / Output
Board C–I/O-1
(7SJ64)
SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
Figure 3-20
Input/output board C-I/O-1 with representation of the jumper settings required
for the board configuration
The selected control voltages of binary inputs BI8 to BI15 are checked according to
Table 3-30. Jumper settings for the contact mode of binary output BO6 are checked
according to Table 3-31.
Figure 3-7 illustrates the assignment of the binary inputs to the mounting location.
3.1 Mounting and Connections
400