2.1.7
EN100-Module
2.1.7.1
Functional Description
2.1.7.2
Setting Notes
Interface Selection
2.1.7.3
Information List
No.
Information
009.0100 Failure Modul
009.0101 Fail Ch1
009.0102 Fail Ch2
SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
The EN100-Module enables integration of the 7SJ62/63/64 in 100-MBit communica-
tion networks in control and automation systems with the protocols according to IEC
61850 standard. This standard permits continuous communication of the devices
without gateways and protocol converters. Even when installed in heterogeneous en-
vironments, SIPROTEC 4 relays therefore provide for open and interoperable opera-
tion. Besides control system integration, this interface enables DIGSI-communication
and inter-relay communication via GOOSE.
No special settings are required for operating the Ethernet system interface module
(IEC 1850, EN100-Module). If the ordered version of the device is equipped with
such a module, it is automatically allocated to the interface available for it, namely
Port B.
Type of In-
formation
IntSP
IntSP
IntSP
Comments
Failure EN100 Modul
Failure EN100 Link Channel 1 (Ch1)
Failure EN100 Link Channel 2 (Ch2)
2.1 General
58