Setting Notes; Information List - Siemens siprotec SJ62 User Manual

2.23.7.2 Setting Notes

Limit Values for
Measured Values

2.23.7.3 Information List

No. Information
- I Admd>
- I Bdmd>
- I Cdmd>
- I1dmd>
- |Pdmd|>
- |Qdmd|>
- |Sdmd|>
- Press<
- Temp>
- 37-1
- |PF|<
270 SP. Pressure<
271 SP. Temp>
273 SP. I A dmd>
274 SP. I B dmd>
275 SP. I C dmd>
276 SP. I1dmd>
277 SP. |Pdmd|>
278 SP. |Qdmd|>
279 SP. |Sdmd|>
284 SP. 37-1 alarm
285 SP. PF(55)alarm
SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
Setting is performed in the DIGSI Configuration Matrix under Settings, Masking I/O
(Configuration Matrix). Set the filter "Measured and Metered Values Only" and select
the configuration group "Setpoints (LV)". Here, default settings may be changed or
new limit values defined.
Settings must be applied in percent and usually refer to nominal values of the device.
Type of In-
formation
LV
LV
LV
LV
LV
LV
LV
LVU
LVU
LV
LV
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
Comments
I A dmd>
I B dmd>
I C dmd>
I1dmd>
|Pdmd|>
|Qdmd|>
|Sdmd|>
Pressure<
Temp>
37-1 under current
|Power Factor|<
Set Point Pressure<
Set Point Temp>
Set Point Phase A dmd>
Set Point Phase B dmd>
Set Point Phase C dmd>
Set Point positive sequence I1dmd>
Set Point |Pdmd|>
Set Point |Qdmd|>
Set Point |Sdmd|>
Set Point 37-1 Undercurrent alarm
Set Point 55 Power factor alarm
2.23 Auxiliary Functions
340