Download Print this page

Additional Settings - Siemens 7SR17 Rho Manual

Motor protection relay

Advertisement

Analog Inputs
Static (Steady-State) Object Number: 30
Change Event Object Number: 32
Analog Input Deadband: 34
Static Variation reported when variation 0 requested: 1 (32-Bit Analog Input with Flag)
Change Event Variation reported when variation 0 requested: 1 (32-Bit Analog Change Event w/o Time)
Analog Input Reporting Deadband Variation reported when variation 0 requested: 1 (16-Bit)
Point
Name
FW#
Index
(Description)
225 Motor RTD6
226 Motor RTD7
227 Motor RTD8
228 Motor RTD9
229 Motor RTD10
230 Motor RTD11
231 Motor RTD12
232 Motor Load
233 Time Running

5.4 Additional Settings

The following relay settings are provided for configuration of the DNP 3.0 implementation when available and are
common to all ports using this protocol.
Setting Name
Unsolicited
DISABLED, ENABLED
Mode
Destination
0 - 65534
Address
DNP3
Application
5, 6 ... 299, 300
Timeout
© 2013 Siemens Protection Devices Limited
or 2 (16-Bit Analog Input with Flag)
or 3 (32-Bit Analog Input w/o Flag)
or 4 (16-Bit Analog Input w/o Flag)
or 5 (Single Precision, floating point Analog Input with Flag)
or 2 (16-Bit Analog Input w/o Time)
or 3 (32-Bit Analog Input with Time)
or 4 (16-Bit Analog Input with Time)
or 5 (Single Precision, floating point Analog Input w/o Time)
or 7 (Single Precision, floating point Analog Input with Time)
or 2 (32-Bit)
or 3 (Single Precision, floating point)
Default
Change Event
Assigned Class
(1, 2, 3 or none)
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
Range/Options
Chapter 4) 7SR17 Rho - Data Communications
Default
Default
Variation
Variation
Default
Static
Event
Multiplier
Object 30
Object 32
2
4
2
4
2
4
2
4
2
4
2
4
2
4
2
4
2
4
Default
Setting
DISABLED
As Required
0
As Required
10s
As Required
Default
Deadband
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
10.000
1.000
10.000
Notes
Setting is only visible
when any port
Protocol is set to
DNP3.
Setting is only
visible when DNP3
Unsolicited Events
set to Enabled.
Setting is only visible
when any port
Protocol is set to
DNP3.
Chapter 4 - Page 65 of 75

Advertisement

loading