Cisco Catalyst 3750 Metro Command Reference Manual page 392

priority
Examples This example shows how to enable the LLQ for the policy map called policy1:
Switch(config)# policy-map policy1
Switch(config-pmap)# class voice
Switch(config-pmap-c)# priority
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command
bandwidth
class
policy-map
priority-queue
queue-limit
random-detect
service-policy
(policy-map class)
shape
show policy-map
Catalyst 3750 Metro Switch Command Reference
2-364
Description
Specifies or modifies the minimum bandwidth provided to a class belonging to
a policy map attached to an ES port.
Specifies the name of the class whose traffic policy you want to create or
change.
Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.
Enables the egress priority queue on a port.
Configures the maximum threshold for tail drop in a policy map attached to an
ES port.
Configures Weighted Random Early Detection (WRED) in a policy map
attached to an ES port.
Creates a service policy as a quality of service (QoS) policy within a policy
map.
Enables traffic shaping in a policy map attached to an ES port.
Displays QoS policy maps.
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
OL-9645-10