Show Mls Qos - Cisco Catalyst 3750 Metro Command Reference Manual

show mls qos

show mls qos
Use the show mls qos user EXEC command to display global quality of service (QoS) configuration
information.
Syntax Description This command has no arguments or keywords.
Command Modes
User EXEC
Command History Release
12.1(14)AX
Examples This is an example of output from the show mls qos command when QoS is enabled and Differentiated
Services Code Point (DSCP) transparency is disabled:
Switch> show mls qos
QoS is enabled
QoS ip packet dscp rewrite disabled
This is an example of output from the show mls qos command when QoS is enabled and DSCP
transparency is enabled:
Switch> show mls qos
QoS is enabled
QoS ip packet dscp rewrite enabled
Related Commands Command
mls qos
Catalyst 3750 Metro Switch Command Reference
2-556
show mls qos
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
Description
Enables QoS for the entire switch.
OL-9645-10