Cisco Catalyst 3750 Metro Command Reference Manual page 553

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
<output truncated>
This is an example of output from the show l2protocol-tunnel summary command:
Switch> show l2protocol-tunnel summary
COS for Encapsulated Packets: 5
Drop Threshold for Encapsulated Packets: 0
Port
------- ----------- ---------------- ---------------- ----------
Fa1/0/2
Fa1/0/3
Fa1/0/4
Fa1/0/5
Fa1/0/6 --- --- --- ----/----/----
Fa1/0/7 --- --- --- ----/----/----
Related Commands Command
clear l2protocol-tunnel counters
l2protocol-tunnel
l2protocol-tunnel cos
OL-9645-10
Protocol Shutdown
Threshold
(cdp/stp/vtp)
(pagp/lacp/udld) (pagp/lacp/udld)
--- --- --- ----/----/----
pagp lacp udld ----/----/----
--- --- --- ----/----/----
pagp lacp udld 1000/----/----
--- --- --- ----/----/----
pagp lacp udld 1000/ 500/----
cdp stp vtp ----/----/----
---- ---- ---- ----/----/----
pagp ---- ---- ----/----/----
pagp ---- ---- ----/----/----
Drop Status
Threshold
(cdp/stp/vtp)
----/----/---- up
----/----/----
----/----/---- up
----/----/----
----/----/---- up
----/----/----
----/----/---- down
----/----/----
----/----/---- down
1000/----/----
----/----/---- down
1000/----/----
Description
Clears counters for protocol tunneling ports.
Enables Layer 2 protocol tunneling for Cisco Discovery
Protocol (CDP), Spanning Tree Protocol (STP), or VLAN
Trunking Protocol (VTP) packets on an interface.
Configures a class of service (CoS) value for tunneled Layer 2
protocol packets.
Catalyst 3750 Metro Switch Command Reference
show l2protocol-tunnel
2-525