Cisco Catalyst 3750 Metro Command Reference Manual page 273

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
Examples This example shows how to apply a MAC extended ACL named macacl2 to a port:
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# mac access-group macacl2 in
You can verify your settings by entering the show mac access-group privileged EXEC command. You
can view configured ACLs on the switch by entering the show access-lists privileged EXEC command.
Related Commands Command
show access-lists
show mac access-group
show running-config
OL-9645-10
Description
Displays the ACLs configured on the switch.
Displays the MAC ACLs configured on the switch.
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_com
mand_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to
navigate to the command.
Catalyst 3750 Metro Switch Command Reference
mac access-group
2-245