Cisco Catalyst 3750 Metro Command Reference Manual page 605

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
In the preceding display, Status is defined as follows:
•
•
Inactive means that the port is not yet part of any VLAN.
This is an example of output from the show mvr interface interface-id command:
switch# show mvr interface fa0/10
Port
----
Fa0/10
This is an example of output from the show mvr interface interface-id members command:
Switch# show mvr interface fastethernet1/0/6 members
239.255.0.0
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
Related Commands Command
mvr (global configuration)
mvr (interface configuration)
show mvr
show mvr members
OL-9645-10
Active means that the port is part of a VLAN
Up/Down means that the port is forwarding/nonforwarding
Type Mode
---- ----
RECEIVER Trunk
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
VLAN Status
---- -------
201 ACTIVE/DOWN
Description
Enables and configures multicast VLAN registration on the
switch.
Configures MVR ports.
Displays the global MVR configuration on the switch.
Displays all receiver ports that are members of an MVR
multicast group.
Catalyst 3750 Metro Switch Command Reference
show mvr interface
Immediate Leave
---------------
DISABLED
2-577