Show Mls Qos Queue-Set - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

show mls qos queue-set

Use the show mls qos queue-set user EXEC command to display quality of service (QoS) settings for
an egress queue-set.
Syntax Description qset-id
Command Modes
User EXEC
Command History Release
12.1(14)AX
Examples This is an example of output from the show mls qos queue-set command:
Switch> show mls qos queue-set
Queueset: 1
Queue
----------------------------------------------
buffers
threshold1:
threshold2:
reserved
maximum
Queueset: 2
Queue
----------------------------------------------
buffers
threshold1:
threshold2:
reserved
maximum
OL-9645-10
show mls qos queue-set [qset-id]
(Optional) ID of the queue-set. Each port belongs to a queue-set, which defines all
the characteristics of the four egress queues per port. The range is 1 to 2.
Modification
This command was introduced.
: 1 2
: 25 25
100 200
100 200
: 50 50
: 400 400
: 1 2
: 25 25
100 200
100 200
: 50 50
: 400 400
3 4
25 25
100 100
100 100
50 50
400 400
3 4
25 25
100 100
100 100
50 50
400 400
Catalyst 3750 Metro Switch Command Reference
show mls qos queue-set
2-565