Debug Platform Dot1Ad - Cisco Catalyst 3750 Metro Command Reference Manual

Appendix B Catalyst 3750 Metro Switch Debug Commands

debug platform dot1ad

To enable debugging of IEEE 802.1ad tagging, use the debug platform dot1ad privileged EXEC
command. To disable debugging, use the no form of the command.
Syntax Description
error
events
receive
transmit
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(54)SE
Usage Guidelines
The undebug platform dot1ad command is the same as the no debug platform dot1ad command.
When you enter debug platform dot1ad with no keywords, all 802.1ad debug messages appear.
Related Commands Command
show debugging
OL-9645-10
debug platform dot1ad [error | events | receive | transmit]
no debug platform dot1ad [error | events | receive | transmit]
Displays 802.1ad error messages.
Displays 802.1ad event debug messages.
Displays 802.1ad receive debug messages.
Displays 802.1ad sent debug messages.
Modification
This command was introduced.
Description
Displays information about the enabled types of debugging.
Catalyst 3750 Metro Switch Command Reference
debug platform dot1ad
B-47