Auto Qos Voip - Cisco Catalyst 3750 Metro Command Reference Manual

Hide thumbs Also See for Catalyst 3750 Metro:
Table of Contents

Advertisement

auto qos voip

Table 2-2
Ingress Queue
SRR
Priority
1. SRR = shaped round robin. Ingress queues support shared mode only.
Table 2-3
Table 2-3
Egress Queue
Priority (shaped)
SRR shared
SRR shared
SRR shared
1. On an enhanced-services (ES) port, the srr-queue bandwidth shape interface configuration command is not part of the
Command Modes
Interface configuration
Command History
Release
12.1(14)AX
12.2(25)EY
Usage Guidelines
Use this command to configure the QoS appropriate for VoIP traffic within the QoS domain. The QoS
domain includes the switch, the interior of the network, and edge devices that can classify inbound traffic
for QoS.
In releases earlier than Cisco IOS Release 12.2(25)EY, auto-QoS configures the switch only for VoIP
with Cisco IP Phones on switch ports.
In Cisco IOS Release 12.2(25)EY or later, auto-QoS configures the switch for VoIP with Cisco IP Phones
on switch and routed ports and for VoIP with devices running the Cisco SoftPhone application. These
releases support only Cisco IP SoftPhone Version 1.3(3) or later. Connected devices must use Cisco Call
Manager Version 4 or later.
To take advantage of the auto-QoS defaults, you should enable auto-QoS before you configure other QoS
commands. You can fine-tune the auto-QoS configuration after you enable auto-QoS.
Catalyst 3750 Metro Switch Command Reference
2-16
Auto-QoS Configuration for the Ingress Queues
Queue Number
1
shared
1
2
shows the generated auto-QoS configuration for the egress queue-set.
Auto-QoS Configuration for the Egress Queue-Set
Queue Number
in the
1
Queue-Set
1
2
3
4
generated auto qos voip command list.
Modification
This command was introduced.
The cisco-softphone keyword was added, and the generated auto-QoS
configuration changed.
Chapter 2
Catalyst 3750 Metro Switch Cisco IOS Commands
Queue Weight
CoS-to-Queue Map
(Bandwidth)
0, 1
81 percent
2, 3, 4, 5, 6, 7
19 percent
Queue Weight
CoS-to-Queue Map
(Bandwidth)
5
10 percent
3, 6, 7
10 percent
2, 4
60 percent
0, 1
20 percent
Queue (Buffer)
Size
67 percent
33 percent
Queue (Buffer)
Size
10 percent
10 percent
26 percent
54 percent
OL-9645-10

Advertisement

Table of Contents
loading

Table of Contents