Debug Platform Matm - Cisco Catalyst 3750 Metro Command Reference Manual

debug platform matm

debug platform matm
Use the debug platform matm privileged EXEC command to enable debugging of platform-dependent
MAC address management. Use the no form of this command to disable debugging.
Syntax Description
aging
all
ec-aging
errors
learning
rpc
secure-address
warning
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines The undebug platform matm command is the same as the no debug platform matm command.
Related Commands Command
debug matm
show debugging
Catalyst 3750 Metro Switch Command Reference
B-60
debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address | warnings}
no debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address |
warnings}
Display MAC address aging debug messages.
Display all platform MAC address management event debug messages.
Display EtherChannel address aging-related debug messages.
Display MAC address management error debug messages.
Display MAC address management address-learning debug messages.
Display MAC address management remote procedure call (RPC) related debug
messages.
Display MAC address management secure address learning debug messages.
Display MAC address management warning debug messages.
Modification
This command was introduced.
Description
Displays information about platform-independent MAC address management.
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 3750 Metro Switch Debug Commands
OL-9645-10