Show Platform Messaging - Cisco Catalyst 3750 Metro Command Reference Manual

Appendix C Catalyst 3750 Metro Switch Show Platform Commands

show platform messaging

Use the show platform messaging privileged EXEC command to display platform-dependent
application and performance message information.
Syntax Description application [incoming |
outgoing | summary]
hiperf [class-number]
Command Modes
Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
OL-9645-10
show platform messaging {application [incoming | outgoing | summary] | hiperf
[class-number]}
Display application message information. The keywords have these
meanings:
•
•
•
Display outgoing high-performance message information. Specify the
class-number option to display information about high-performance
messages for this class number. The range is 0 to 36.
Modification
This command was introduced.
incoming—(Optional) Display only information about incoming
application messaging requests.
outgoing—(Optional) Display only information about incoming
application messaging requests.
summary—(Optional) Display summary information about all
application messaging requests.
Catalyst 3750 Metro Switch Command Reference
show platform messaging
C-15