Cisco Catalyst 3750 Metro Command Reference Manual page 640

show vlan
Table 2-31
Field
VLAN
Name
Status
Ports
Type
SAID
MTU
Parent
RingNo
BrdgNo
Stp
BrdgMode
Trans1
Trans2
Remote SPAN VLANs
Primary/Secondary/
Type/Ports
This is an example of output from the show vlan summary command:
Switch> show vlan summary
Number of existing VLANs
Number of existing VTP VLANs
Number of existing extended VLANs : 0
This is an example of output from the show vlan id command:
Switch# show vlan id 2
VLAN Name
---- -------------------------------- --------- -------------------------------
2
VLAN Type
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
2
Remote SPAN VLAN
----------------
Disabled
Catalyst 3750 Metro Switch Command Reference
2-612
show vlan Command Output Fields
Description
VLAN number.
Name, if configured, of the VLAN.
Status of the VLAN (active or suspend).
Ports that belong to the VLAN.
Media type of the VLAN.
Security association ID value for the VLAN.
Maximum transmission unit size for the VLAN.
Parent VLAN, if one exists.
Ring number for the VLAN, if applicable.
Bridge number for the VLAN, if applicable.
Spanning Tree Protocol type used on the VLAN.
Bridging mode for this VLAN—possible values are source-route bridging
(SRB) and source-route transparent (SRT); the default is SRB.
Translation bridge 1.
Translation bridge 2.
Identifies any RSPAN VLANs that have been configured.
Not applicable to this release.
VLAN0200
SAID MTU
enet 100002 1500
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
: 45
: 45
Status Ports
active Fa1/0/17, Fa1/0/18, Fa1/0/21
Gi1/0/1
Parent RingNo BridgeNo Stp
- - -
BrdgMode Trans1 Trans2
- - 0 0
OL-9645-10