Show Arp Access-List - Cisco Catalyst 3750 Metro Command Reference Manual

show arp access-list

show arp access-list
Use the show arp access-list user EXEC command to display detailed information about Address
Resolution Protocol (ARP) access control lists (ACLs).
This command is available only if your switch is running the enhanced multilayer image (EMI).
Syntax Description
acl-name
Command Modes User EXEC
Command History Release
12.2(25)EY
Examples
This is an example of output from the show arp access-list command:
Switch> show arp access-list
ARP access list rose
Related Commands Command
arp access-list
deny (ARP access-list
configuration)
ip arp inspection filter vlan
permit (ARP access-list
configuration)
Catalyst 3750 Metro Switch Command Reference
2-432
show arp access-list [acl-name]
(Optional) Name of the ACL.
Modification
This command was introduced.
permit ip 10.101.1.1 0.0.0.255 mac any
permit ip 20.3.1.0 0.0.0.255 mac any
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
Description
Defines an ARP ACL.
Denies an ARP packet based on matches against the DHCP bindings.
Permits ARP requests and responses from a host configured with a
static IP address.
Permits an ARP packet based on matches against the DHCP bindings.
OL-9645-10