Ike Settings (Ipsec Settings) - Konica Minolta bizhub C550 User Manual

Network Settings

IKE Settings (IPsec Settings)

Specify the settings for the IKE protocol used during IPsec communication.
Settings can be specified for the following.
Parameter
Encryption Algorithm
Authentication Algorithm
Key Validity Period
Diffie-Hellman Group
!
Detail
Different combinations of the encryption algorithm and authentication al-
gorithm settings for IPsec communication can be saved in four groups.
0 In order to apply the IPsec settings, settings must be specified for "IKE
Settings", "IPsec SA Settings" and "Peer".
1
Touch [IPsec Settings] in the TCP/IP Settings screen.
2
To specify settings, touch [ON], and then touch [IKE Settings].
IKE Settings screen 1/2 appears.
C550
Description
Select the encryption algorithm to be used when creating control
tunnels.
Select the authentication algorithm to be used when creating con-
trol tunnels.
Specify the length of time that the key is valid after being generated
when creating control tunnels.
Select the Diffie-Hellman group.
4
4-32