Installation Using Add Printer Wizard; Settings Of This Machine; Tcp/Ip Settings Of This Machine; Raw Port Number Setting Of This Machine - Konica Minolta bizhub 42 User Manual

5.2

Installation using Add Printer Wizard

5.2 Installation using Add Printer Wizard
This section describes how to install the driver using network connection (LPR/Port9100).
To use LPR/Port9100 printing, specify the port while installing the fax driver.
d
Reference
For setup procedures for other network connection methods (IPP/IPPS, Web service print), refer to the [Us-
er's Guide Print Operations].
5.2.1

Settings of this machine

Before you can use this machine through the network connection, you must configure the network settings
for this machine.

TCP/IP settings of this machine

Specify the IP address of this machine.
d
Reference
For details on setting the IP address of this machine, refer to the [User's Guide Administrator Operations].

RAW port number setting of this machine

When using Port9100 printing, in [TCP/IP Settings] of this machine, enable the RAW port and specify the
RAW port number ([9100] in the initial setting).
d
Reference
For details on specifying the RAW port number of this machine, refer to the [User's Guide Administrator Op-
erations].

LPD setting of this machine

Before using LPR printing, enable LPD in [TCP/IP Settings] of this machine.
d
Reference
For details on LPD settings of this machine, refer to the [User's Guide Administrator Operations].
bizhub 42/36
5
5-5