Sending The Fax After Specifying Tx Stamp Settings - Konica Minolta bizhub C550 User Manual

Useful transmission functions

Sending the fax after specifying TX Stamp settings

1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to "Loading the original" on
page 2-7.
3
Touch buttons in order of [Scan Settings], [Application].
4
Touch [TX Stamp].
– Touch [TX Stamp] once again to cancel the settings.
5
Touch [Close].
Returns to Scan Settings screen.
6
Touch [OK].
Returns to Fax/Scan screen.
7
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning condi-
tions" on page 2-12 or "Scan Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on
page 6-4.
– For details on Communication Settings, refer to "Communication
Settings" on page 6-5.
C550
6
6-31