Using Web Services To Establish An Ssl Communication From This Machine To Vista/Server 2008; Tcp/Ip Settings; Web Service Common Settings - Konica Minolta bizhub C452 Network Administrator's Manual

2.37

Using Web services to establish an SSL communication from this machine to Vista/Server 2008

2.37 Using Web services to establish an SSL communication from this
machine to Vista/Server 2008
Configure settings to use the encrypted SSL communication from this machine to a computer running on the
Windows Vista/Server 2008 in a Web services environment. Security of Web services communication can be
enhanced using the SSL protocol encryption.
When you configure the SSL communication settings, check the following points.
- To use the encrypted SSL communication between this machine and the computer, you must set the
bidirectional SSL communication between them. Configure both the following settings and the settings
for "Using Web services to secure communication from Vista/Server 2008 to this machine via SSL".
- Create a certificate at the computer first, and then associate the TCP/IP communication port (the
default port number is 5358).
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
2.37.1

TCP/IP Settings

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
2.37.2

Web Service Common Settings

In the administrator mode of PageScope Web Connection, select "Network" ö "Web Service Settings" ö
"Web Service Common Settings".
Item
Friendly Name
SSL Settings
Publication Service
Certificate Verifica-
tion Level Settings
Validity Period
Key Usage
Chain
Expiration Date
Confirmation
bizhub C652/C652DS/C552/C552DS/C452
TCP/IP Settings
Web Service Common Set-
Description
Enter a Friendly Name (up to 62 characters).
Select "ON".
If you use this machine in an environment where NetBIOS
is disabled or only the IPv6 protocol communication is
used by the Windows Vista or Server 2008 system, set this
item to "Enable".
The Publication Service function can detect up to 512
destinations, including those detected with the NetBIOS
service.
Specify how to validate a certificate.
Select whether to check that the target certificate is within
the validity period.
Select whether to check that the certificate is used ac-
cording to the purpose approved by the issuer.
Select whether to check that the certificate chain (certifi-
cation path) is correct.
The chain is validated by referencing the external certifi-
cates managed on this machine. For details, refer to
page 2-210.
Select whether to check that the target certificate is within
the validity period.
The OCSP service and CRL (Certificate Revocation List)
are checked in this order when the expiration date of the
certificate is checked.
tings
Finish
2
Prior check
2-113