Connecting An Srx5600 Services Gateway To An External Alarm-Reporting; Device - Juniper SRX5600 Hardware Manual

SRX5600 Services Gateway Hardware Guide
Connecting the SRX5600 Services Gateway to Management and Alarm Devices
Connecting the SRX5600 Services Gateway to a Network for Out-of-Band Management
Related
Documentation
64
Connecting the SRX5600 Services Gateway to a Network for Out-of-Band
Management on page 64
Connecting the SRX5600 Services Gateway to a Management Console or an Auxiliary
Device on page 65

Connecting an SRX5600 Services Gateway to an External Alarm-Reporting

Device on page 66
To connect the services gateway Routing Engine to a network for out-of-band
management, connect an Ethernet cable with RJ-45 connectors to the
on the Routing Engine. One Ethernet cable is provided with the services gateway. To
connect to the
ETHERNET
Plug one end of the Ethernet cable
1.
the ETHERNET port on the Routing Engine.
Plug the other end of the cable into the network device.
2.
Figure 32: Ethernet Port
Figure 33: Routing Engine Ethernet Cable Connector
Tools and Parts Required for SRX5600 Services Gateway Connections on page 63
Overview of Installing the SRX5600 Services Gateway on page 39
Connecting the SRX5600 Services Gateway to a Management Console or an Auxiliary
Device on page 65
Connecting an SRX5600 Services Gateway to an External Alarm-Reporting Device on
page 66
Connecting Network Cables to SRX5600 Services Gateway IOCs and Port Modules
on page 67
port on the Routing Engine:
(Figure 33 on page 64
Figure 32 on page 64
ETHERNET
shows the connector) into
shows the port.
Copyright © 2014, Juniper Networks, Inc.
port