Connecting An Srx5600 Services Gateway To An External Alarm-Reporting; Device - Juniper SRX5600 Hardware Manual

SRX5600 Services Gateway Hardware Guide
Connecting the SRX5600 Services Gateway to Management and Alarm Devices
Connecting the SRX5600 Services Gateway to a Network for Out-of-Band Management
Related
Documentation
66
This section includes the following topics:
Connecting the SRX5600 Services Gateway to a Network for Out-of-Band
Management on page 66
Connecting the SRX5600 Services Gateway to a Management Console or an Auxiliary
Device on page 67

Connecting an SRX5600 Services Gateway to an External Alarm-Reporting

Device on page 67
To connect the services gateway Routing Engine to a network for out-of-band
management, connect an Ethernet cable with RJ-45 connectors to the
on the Routing Engine. One Ethernet cable is provided with the services gateway. To
connect to the
ETHERNET
Turn off the power to the management device.
1.
Plug one end of the Ethernet cable (Figure 28 on page 66 shows the connector) into
2.
the port on the Routing Engine. Figure 27 on page 66 shows the port.
ETHERNET
Plug the other end of the cable into the network device.
3.
Figure 27: Ethernet Port
Figure 28: Routing Engine Ethernet Cable Connector
Tools and Parts Required for SRX5600 Services Gateway Connections on page 65
Overview of Installing the SRX5600 Services Gateway on page 43
Connecting the SRX5600 Services Gateway to a Management Console or an Auxiliary
Device on page 67
Connecting an SRX5600 Services Gateway to an External Alarm-Reporting Device on
page 67
Connecting Network Cables to SRX5600 Services Gateway IOCs and Port Modules
on page 68
port on the Routing Engine:
ETHERNET
Copyright © 2010, Juniper Networks, Inc.
port