Connecting A Dvd Or Blu-Ray Player Or Other Analog Video Equipment - Avaya Scopia XT7000 Series Deployment Manual

Setting Up the XT Series Hardware
9. Connect one end of the power supply cable to the DC IN 12V connector on each camera,
and the other end into one of the power sockets on the wall.
10. Configure the cameras' settings (see
If required, connect a DVD or HDMI media player to a port on the Avaya Scopia
Camera Switch.
Related links
Connecting Cameras or DVD players
Connecting a DVD or Blu-ray Player or Other Analog Video
Equipment
About this task
You can add a DVD or Blu-ray player to the Avaya Scopia
videoconference by connecting it to either the vertical camera port
Codec Unit (see Figure 33: Connecting a DVD player or digital-analog converter
On the XT7000 Series only, you have the option of connecting to one of two vertical HDMI
your HDMI 2 port is available (located under
DVI port available for a computer connection.
You can also add an analog camera or other analog video equipment, such as legacy composite
video or component video media devices, by connecting it to an analog-digital converter which, in
turn, is connected to the same camera or DVI ports on the XT Codec Unit (see
Connecting a DVD player or digital-analog converter
tested with the XT Series, see Third-Party Accessories for Avaya Scopia
media devices include VCR players, DVD players, and cameras.
The XT Series supports digital content protection. If the XT Codec Unit detects that non-compliant
devices are attached to one of the HD CAM inputs, the video is locked and a special image with a
lock is displayed in place of the protected content.
• You can only view digitally protected content on a device that supports High-bandwidth Digital
Content Protection (HDCP).
• You cannot view digitally protected content on a device that copies HDCP content.
• You cannot send digitally protected content to non-HDCP devices.
Related links
Connecting Cameras or DVD players
January 2017
on page 49
Figure 33: Connecting a DVD player or digital-analog converter
on page 49
Avaya Scopia
Comments on this document? infodev@avaya.com
Configuring Cameras on page 116.)
®
XT Series to share its content during a
), we recommend using this port and keeping the
on page 60). For information on the converters
®
XT Series Deployment Guide
®
XT
or the DVI port on the XT
on page 60).
Figure 33:
®
XT Series. These type of
ports. If
60