2. Set the fields as required.
Table 52: Configuring Rules for Accessing XT Web Video
Field Name
Web Video Management
Enable all addresses
Address
Subnet mask
Password
Note:
You cannot change the settings using the web interface.
Related links
Advanced Configuration of the XT Series
Remotely Controlling the XT Series with AT Commands
About this task
For complex room setups, you can remotely control your Avaya Scopia
like
AMX, Creston or Extron devices
this name because while it is proprietary, it has a similar syntax to the standard modem AT
commands, using ASCII characters to communicate messages.
January 2017
Remotely Controlling the XT Series with AT Commands
Figure 125: Web Video Settings
Description
Select No to disable the feature.
Select No to restrict web video remote access via TCP to specific
devices with an IP address in the range of the Address and Subnet
Mask fields below.
Enter the IP address of control devices allowed to remotely access
web video.
Enter the Subnet mask to modify the Address field into a range of
addresses allowed to remotely access web video.
Enter a password required to access the web video feature.
on page 128
which use a proprietary API known as AT commands. It has
®
Avaya Scopia
XT Series Deployment Guide
Comments on this document? infodev@avaya.com
®
XT Series from controllers
181