Configuring Enhanced Lecture Mode - Avaya Scopia XT7000 Series Deployment Manual

Configuring Enhanced Lecture Mode

About this task
You can configure the XT Series to display the Continuous Presence (CP) of the other participants
to the lecturer, while the other participants see the lecturer only. Alternatively, you can configure the
XT Series to display both the lecturer video and the video of the previous or active speaker to
everyone, including the lecturer. In this layout, the lecturer video is displayed as a large image and
the previous or currently active speaker is displayed as a small image.
Procedure
1. Access the MCU settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > MCU. From the endpoint's main menu, select
Configure > Advanced > Calls > Preferences > MCU.
From the endpoint interface
Figure 118: MCU Preferences
2. Choose from the following options:
• Select 1 terminal to enable enhanced lecture mode. In enhanced lecture mode, the XT
Series hosting the meeting sends the local participant video as the lecturer, while the
lecturer can see the Continuous Presence (CP) of other participants. This is the default
behavior.
• Select 2 terminals — A to send everyone, including the lecturer, the lecturer video as a
large display and the video of the previous/active speaker as a small display.
3. From the web interface only, select Save.
Related links
Advanced Configuration of the XT Series
January 2017
I need to obtain this graphic from Laura
on page 128
®
Avaya Scopia XT Series Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Enhanced Lecture Mode
From the web interface
175