Installing Avaya Scopia - Avaya Scopia XT7000 Series Deployment Manual

Initial Configuration of the XT Series
Field
Authentication Name
Authentication Password
Use SIP Server
Server Address
2. Select Done to complete the Quick Setup Wizard.
3. To configure advanced SIP settings, such as the preferred transport protocol, see
Registering the XT Series to a SIP Server
Related links
Configuring Basic Settings with the Quick Setup Wizard

Installing Avaya Scopia

(XT Executive)
About this task
This procedure describes how to configure your XT Executive (only) to navigate its menus with a
keyboard and mouse by installing Avaya Scopia
Windows or Mac (see
Note:
You cannot install the Avaya Scopia
the Yosemite operating system. The Yosemite operating system does not allow you to install
packages obtained from outside of the Apple Store. However, there is a workaround available to
enable you to obtain and run the installation package if you have the Yosemite operating system
(or a higher operating system, such as El Capitan or Sierra). For more information, see
Resolving download problems
®
The Avaya Scopia
Before you begin
1. Verify your computer is running either Windows XP/Vista/7/8, or if it is a Mac, verify it is
running OSX 10.x or higher.
2. Connect your computer to the XT Executive (see
Series on page 67).
January 2017
Description
When connecting over SIP, this name is displayed on the monitors
participating in the videoconference (for example, John-Smith, or
9th-Floor-Room) .
If necessary, enter the name for authenticating the XT Series with
the SIP server. It can be the same as the User parameter.
If necessary, enter the password for authenticating your XT Series
with the SIP server.
Enable registering the system to the SIP server by selecting Yes.
For redundant SIP deployments, you can enter information for up to
three SIP servers, as described in
SIP Server
Enter the DNS name or IP address of the SIP server, used to
register the endpoint.
®
XT Control to Use Keyboard and Mouse
Navigating Menus with the Keyboard and Mouse
®
XT Control installation package on a Mac that is running
on page 251.
XT Control utility can only be installed from the endpoint's web interface.
Avaya Scopia
Comments on this document? infodev@avaya.com
Registering the XT Series to a
on page 124.
on page 124.
on page 98
®
XT Control, a small standalone program for
Connecting a Computer to the XT
®
XT Series Deployment Guide
on page 78).
106