Connecting Headphones Or An Amplifier With Loudspeakers; Connecting Microphones And Speakers To The Xt Series - Avaya Scopia XT7000 Series Deployment Manual

- Audio mixers like those from Clear One. An audio mixer connects multiple microphones
(or other audio inputs) to generate a single audio stream.
- A computer audio-out connection or line audio connection.
2. (Optional, only for XT5000 and XT7000 Series) To daisy-chain a second Three-way
Microphone Pod, connect the second microphone's output
input .
3. Plan echo cancellation according to your audio setup:
Table 8: Configuring Echo Cancellation
Audio Setup
Microphone Pod (One-way or
three-way)
A single third-party
microphone (without echo
cancellation)
Audio mixer
Related links

Connecting Microphones and Speakers to the XT Series

Connecting Headphones or an Amplifier with Loudspeakers

About this task
By default, you hear the sound of your Avaya Scopia
monitors are connected to the XT Codec Unit using HDMI, which sends both audio and video.
To boost sound beyond the monitors' own speakers, you can add an amplifier and loudspeakers by
connecting them to the analog or digital audio output port
January 2017
Figure 35: Connecting a microphone to the XT Codec Unit
Configure Echo Cancellation
XT Series enables its own echo cancellation by default.
Enable the XT Series built-in echo cancellation (see
Advanced Echo Cancellation on External Microphones
page 155).
Disable the XT Series built-in echo cancellation (see
Microphones
audio mixer's settings, or (ideally) on each microphone.
®
Avaya Scopia XT Series Deployment Guide
Comments on this document? infodev@avaya.com
Connecting Microphones and Speakers to the XT Series
to the first Microphone Pod
on page 120). You then cancel the echo either in the
on page 61
®
XT Series from the monitors' speakers. The
of the XT Codec Unit.
Configuring
on
Configuring
65