Checking Monitor Image - Avaya Scopia XT7000 Series Deployment Manual

Troubleshooting the Avaya Scopia
• Check the settings on the third party monitor. These settings vary depending on the monitor
vendor and model. These are the most relevant things to check:
- The monitor vendor and model should be identical.
- The graphic settings, such as backlighting, contrast, sharpness, and color should be
identical and ideally they should be the default values.
- The movie or cinema mode should be used and not the gaming mode.
- Cropping or resizing of the content on the monitors should be disabled.
- Any dynamic gain or smart management of the image should be disabled.
Related links
Troubleshooting the Avaya Scopia

Checking Monitor Image

Condition
If you suspect that the monitor display aspect ratio and color renderings may not be optimized, you
can run a test. You can use the test image to finely tune monitor colors and aspect ratio using the
remote control of the monitor provided by the vendor, according to the monitor available options.
Solution
1. Navigate to Configure > System Status > Diagnostics > I/O Connections > Monitor >
Tests.
January 2017
® XT Series
Figure 182: Adjusting the monitor
®
XT Series on page 220
®
Avaya Scopia XT Series Deployment Guide
Comments on this document? infodev@avaya.com
238