Configuring Cameras - Avaya Scopia XT7000 Series Deployment Manual

Initial Configuration of the XT Series
Field Name
7. From the web interface only, select Save.
Related links
Initial Configuration of the XT Series

Configuring Cameras

About this task
Configure the camera depending on the type of camera, its functionality, and how it is connected to
the XT Series. For more information about connecting your camera to the XT Codec Unit, see
Connecting Cameras or DVD players
In this section, first define which camera is the unit's default camera and other general properties,
then define each camera's settings by configuring the port connection.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Connect the video equipment, as described in
Procedure
1. Access the camera settings. From the XT Series web interface, select Administrator
settings > I/O connections > Cameras > General. From the endpoint's main menu, select
Configure > Advanced > I/O connections > Cameras > General.
January 2017
Description
• Clockwise rotates the overlapped image clockwise.
• Counterclockwise rotates the overlapped image anti-clockwise.
on page 93
on page 49.
Figure 73: Configuring general camera settings from the web interface
Avaya Scopia
Comments on this document? infodev@avaya.com
on page 129.
Connecting Cameras or DVD players
®
XT Series Deployment Guide
on page 49.
116