Configuring Microphones - Avaya Scopia XT7000 Series Deployment Manual

Initial Configuration of the XT Series
Field Name
Contrast,
Brightness,
Saturation
Backlight
compensation
Exposure
compensation
Focus mode
Camera sharpness
Note:
Depending on the camera, there may be additional options. For example, with the Flex
camera:
• Ceiling Mount: Select to flip and mirror the image.
• IR Receivers: Select to enable the IR sensor on the camera.
• Picture: Select to change the contrast, brightness, saturation and hue.
• Wide Dynamic Range: Select to correct the backlight.
6. From the web interface only, select Save.
Related links
Initial Configuration of the XT Series

Configuring Microphones

About this task
After connecting your microphones to the Avaya Scopia
audio connection and configure its settings.
There are several connections available to input audio to the XT Series:
• The dedicated microphone
Series and the XT7000 Series can support two of these microphones daisy-chained. When
capturing stereo audio, only the first Microphone Pod is used.
• The USB port is used for USB headsets (lower USB only), or for a USB camera with a built-in
microphone (upper USB only).
January 2017
Description
Note:
The white balance available options might be different for some
camera models.
(USB cameras only) Adjust the brightness, contrast and saturation or color
intensity of the camera image.
Select Yes to counteract silhouetting of subjects when the backlighting is
excessive.
If the camera image is too bright or dark, enable exposure compensation to
manually compensate in the Exposure Level field (PTZ cameras only).
Set the camera focus to Automatic, or Manual to specify the distance from
the camera to the table in Focus distance.
Adjust the sharpness of the image from your camera.
on page 93
port is for the digital Three-way Microphone Pod. The XT5000
®
Avaya Scopia XT Series Deployment Guide
Comments on this document? infodev@avaya.com
®
XT Series, you must enable the relevant
120