Resolving Audio Problems - Avaya Scopia XT7000 Series Deployment Manual

Resolving Audio Problems

Problem
I cannot hear audio after setting up the system.
Volume setting
Solution
Make sure the system volume is not set to 0 by pressing the volume keys
Control Unit.
Headset connection
Solution
If you are using a USB headset, ensure it is connected to the lower USB port on the XT Series.
Connecting an headset to the upper USB port will cause choppy audio.
Audio input and output
Audio input and output may not be working properly.
Solution
1. Access audio tests. From the XT Series web interface, select Diagnostics > I/O
Connections > Audio > Tests. From the endpoint's main menu, select Configure >
System Status > Diagnostics > I/O Connections > Audio > Tests.
Figure 175: Performing the audio tests from the web interface
2. Select Loc tone
completed successfully.
January 2017
to check the audio input received by the endpoint. Verify the test
®
Avaya Scopia XT Series Deployment Guide
Comments on this document? infodev@avaya.com
Resolving Audio Problems
on the XT Remote
231