Enabling Advanced Maintenance On The Xt Series - Avaya Scopia XT7000 Series Deployment Manual

Adding your own jingle

Enabling Advanced Maintenance on the XT Series

About this task
To perform advanced configuration and maintenance from the endpoint itself, like upgrading the
firmware, you must first enable access to the advanced settings.
Before you begin
Ensure that you have the password to access the Advanced settings. The default password is
1234.
Procedure
1. Access basic settings. From the XT Series web interface, select Basic Settings >
Preferences > General. From the endpoint's main menu, select Configure > General.
2. Set Show Advanced Settings to Yes.
3. From the XT Series web interface, select Administrator Settings. From the endpoint, press
Back and then select Advanced.
4. Enter the password to display the Advanced screen. The default password is 1234.
January 2017
on page 196
Avaya Scopia
Comments on this document? infodev@avaya.com
Enabling Advanced Maintenance on the XT Series
®
XT Series Deployment Guide
[1...96]
129