Return To Stand-By Mode; Recommendation - Ricoh Gim-MF1a Field Service Manual

7. Energy Save
Default: [1 minute]
Ready State After Printing
(User Tools key > System Settings > Administrator Tools > Ready State After Printing)
The user can specify how the printer operates when it receives print jobs in Sleep mode.
Default: [Cntrl Panel Off (EngySavg)]
• Control Panel On
The printer turns on the control panel and prints received jobs.
• Cntrl Panel Off (EngySavg)
The printer prints received jobs but the control panel remains off.
Slp Tmr after Engy Sv Prt
(User Tools key > System Settings > Administrator Tools > Slp Tmr after Engy Sv Prt)
When [Ready State After Printing] is set to [Cntrl Panel Off (EngySavg)], the user can specify
whether or not the printer resumes Sleep mode immediately after exiting Energy Saver mode.
Default: [Immediate]
• Immediate
The printer resumes Sleep mode immediately after printing, regardless of the Sleep Mode
Timer settings.
• After Time Set by Tmr Ends
The printer resumes Sleep mode after the time specified in Sleep mode elapses.

Return to Stand-by Mode

Sleep Mode
Recovery time: 9 sec.

Recommendation

We recommend that the default settings should be kept.
• If the customer requests that these settings should be changed, please explain that their energy
costs could increase, and that they should consider the effects on the environment of extra energy
use.
• If it is necessary to change the settings, please try to make sure that the Sleep Mode timer is not too
long. Try with a shorter setting first, such as 5 min., then go to a longer one (such as 15 min.) if the
customer is not satisfied.
184